For each local intelligence device installed and connected to the NSW government’s data acquisition service, water users will receive a $975 rebate on their water bill, as a credit each year until the total rebate amount is reached.
Water users who install a meter in accordance with the NSW non-urban metering and floodplain harvesting measurement rules are eligible for this rebate.
Read WaterNSW’s telemetry fact sheet for more information.
The lists below identify local intelligence devices (LIDs) that meet the requirements under NSW’s non-urban metering rules.
Please note that the lists specify the version of the LID that has been assessed, and any unlisted version of the same device is likely to require assessment before it can be confirmed as meeting the functional and security requirements of the DAS.
For information about estimated product delivery timeframes visit Latest non-urban metering information.
Non-urban metering - LIDs currently available for installation
The LIDs in this list are approved for non-urban metering and are in production or available for purchase.
Updated September 2023.
Meterwatch
| Manufacturer | Halytech Pty Ltd |
|---|---|
| Distributor | Halytech Pty Ltd |
| Model number | meterwatch |
| Available for purchase? | Yes |
| Firmware version | meterwatch v1.77 |
| Previous name(s) | N/A |
| Design documents | Contact: support@halytech.com.au |
| Distributor contact details | Phone: (Sales/Support) 02 8814 5235 Email: sales@halytech.com.au OR Webpage: halytech.com.au |
| Date of listing | 10 December 2020 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |
YDOC - PDS-YD-NSW*
| Manufacturer | YDOC |
|---|---|
| Distributor | Pacific Data Systems Australia Pty Ltd |
| Model number | PDS-YD-NSW |
| Available for purchase? | Yes |
| Firmware version | v4.2 B5 |
| Version | 1 |
| Previous version name(s) | N/A |
| Design document | Email: nswwatermeters@pacdatasys.com.au |
| Distributor contact details | Phone: 07 3361 2000 Email: nswwatermeters@pacdatasys.com.au Webpage: https://pacdatasys.com.au/environmental-monitoring-products/p/ydoc |
| Date of listing | 15 February 2021 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | Yes |
| Suitable for water users who are required to or choose to use telemetry | Yes |
YDOC - PDS-YD-NSW-E*
| Manufacturer | YDOC |
|---|---|
| Distributor | Pacific Data Systems Australia Pty Ltd |
| Model number | PDS-YD-NSW-E |
| Available for purchase? | Yes |
| Firmware version | v4.2 B5 |
| Previous version name(s) | N/A |
| Design document | Email: nswwatermeters@pacdatasys.com.au |
| Distributor contact details | Phone: 07 3361 2000 Email: nswwatermeters@pacdatasys.com.au Webpage: https://pacdatasys.com.au/environmental-monitoring-products/p/ydoc |
| Date of listing | 15 February 2021 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | Yes |
| Suitable for water users who are required to or choose to use telemetry | Yes |
Captis Multi v1.20
| Manufacturer | Kallipr |
|---|---|
| Distributor | SigSense |
| Model number | Captis Multi 1.20 |
| Available for purchase? | Yes |
| Firmware version | V1.20.06 |
| Version | 1 |
| Previous version name(s) | N/A |
| Design document | Email: support@sigsense.com.au |
| Distributor contact details | Phone: (Sales/Support) 07 3053 5229 Email: sales@sigsense.com.au Webpage: http://www.sigsense.com.au/ |
| Date of listing | 6 September 2022 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |
Captis Pulse v1.20
| Manufacturer | Kallipr |
|---|---|
| Distributor | SigSense |
| Model number | Captis Pulse 1.20 |
| Available for purchase? | Yes |
| Firmware version | V1.20.06 |
| Version | 1 |
| Previous version name(s) | N/A |
| Design document | Email: support@sigsense.com.au |
| Distributor contact details | Phone: (Sales/Support) 07 3053 5229 Email: sales@sigsense.com.au Webpage: http://www.sigsense.com.au/ |
| Date of listing | 6 September 2022 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |
FlowPRO Multipoint Monitoring System
| Manufacturer | Campbell Scientific Australia |
|---|---|
| Distributor | Campbell Scientific Australia |
| Model number | FlowPRO Multipoint Monitoring System CR300-CELL220 |
| Available for purchase? | Yes |
| Firmware version | OS 10.05 |
| Version | 1 |
| Previous version name(s) | N/A |
| Design document | Email: info@campbellsci.com.au |
| Distributor contact details | Phone: (07) 4401 7700 |
| Date of listing | 14 October 2022 |
| Suitable for one LID to multiple meters | Yes |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |
* Identifies LIDs that can be used solely as data loggers or as combined data logger/telemetry device.
AquaLID
| Manufacturer | Electrical Systems Engineering |
|---|---|
| Distributor | Electrical Systems Engineering |
| Model number | AquaLID |
| Available for purchase? |
Yes Note: This LID cannot be bought separately and must be purchased along with an i500 Aquamonix meter. |
| Firmware version | 1.03 |
| Version | 1 |
| Previous version name(s) | N/A |
| Design document | Email: enquiries@electricalsystems.com.au |
| Distributor contact details | Phone: (08) 9302 2932 |
| Date of listing | 22 June 2023 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |
* Identifies LIDs that can be used solely as data loggers or as combined data logger/telemetry device.
CAPTIS Recharge
| Manufacturer | SigSense |
|---|---|
| Distributor | Kaliipr |
| Model number | CAPTIS Recharge (NUM) |
| Firmware version | V1.21.0 |
| Previous version name(s) | Captis Multi V1.20 |
| Design details | Email: support@sigsense.com.au |
| Distributor contact details | Phone: (Sales/Support) 07 3053 5229 OR |
| Date of listing | 27 July 2023 |
| Suitable for floodplain harvesting storage measurement | Yes, Captis Recharge (FPH) |
| Suitable for Non-urban metering | Yes |
| Suitable for one LID to multiple meters | No |
* Identifies LIDs that can be used solely as data loggers or as combined data logger/telemetry device.
LIDs no longer available for purchase
The LIDs in this list are approved for non-urban metering, however they are no longer in production or available for purchase. If you have a LID from this list installed, it may remain in place until it reaches the end of product life.
Aqualink - 1500-12CXX & 1500-R2CXX
| Manufacturer | Aquamonix Pty Ltd |
|---|---|
| Model number | AquaLink – I500-I2CXX (Integral Mount) Note: The AquaLink LID is only suitable for Aquamonix pattern approved flow meters – specifically our 1060, 2020, 2030 and 2060 meters operating with an I500 transmitter only. |
| Available for purchase? | No |
| Firmware version | 1.18.03 |
| Previous version name(s) | N/A |
| Design documents | Contact: edward.cho@aquamonix.com.au |
| Reseller contact details | Aquamonix Phone: (Sales/Support) 1300 797 246 Email: sales@aquamonix.com.au Webpage: http://www.aquamonix.com.au/ |
| Date of listing | 29 January 2021 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |
Captis Pulse - MC401120AU
| Manufacturer | mloT Pty Ltd |
|---|---|
| Model number | MC401120AU |
| Available for purchase? | No |
| Firmware version | 1.18.03 |
| Previous version name(s) | MC401020AU (25 June 2021) |
| Design document | Contact: support@sigsense.com.au |
| Reseller contact details | Sigsense Phone: (Sales/Support) 07 3053 5229 Email: sales@sigsense.com.au OR Webpage: http://www.sigsense.com.au/ |
| Date of listing | 1 December 2021 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |
Captis Multi - MC801120AU
| Manufacturer | mloT Pty Ltd |
|---|---|
| Model number | MC801120AU |
| Available for purchase? | No |
| Firmware version | 1.18.03 |
| Version | 2 |
| Previous version name(s) | MC801020AU (25 June 2021) |
| Design documents | Contact: support@sigsense.com.au |
| Reseller contact details |
Sigsense
Phone: (Sales/Support) 07 3053 5229 Email: sales@sigsense.com.au OR Webpage: http://www.sigsense.com.au/ |
| Date of listing | 1 December 2021 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |
Captis Pulse - MC401020AU
| Manufacturer | mloT Pty Ltd |
|---|---|
| Model number | MC401020AU |
| Available for purchase? | No |
| Firmware version | 1.18.03 |
| Design documents | Contact: support@sigsense.com.au |
| Reseller contact details |
Sigsense
Phone: (Sales/Support) 07 3053 5229 Email: sales@sigsense.com.au OR Webpage: http://www.sigsense.com.au/ |
| Date of listing | 25 June 2021 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |
Captis Multi - MC801020AU
| Manufacturer | mloT Pty Ltd |
|---|---|
| Model number | MC801020AU |
| Available for purchase? | No |
| Firmware version | 1.18.03 |
| Design documents | Contact: support@sigsense.com.au |
| Reseller contact details |
Sigsense
Phone: (Sales/Support) 07 3053 5229 Email: sales@sigsense.com.au OR Webpage: http://www.sigsense.com.au/ |
| Date of listing | 25 June 2021 |
| Suitable for one LID to multiple meters | No |
| Suitable for water users who are not required to use telemetry or choose not to use telemetry | No |
| Suitable for water users who are required to or choose to use telemetry | Yes |